LightSound Lab 05 · Researcher’s guide
Researcher’s guide
For physicians, clinical psychologists and researchers who use VIGOR·CHROMA within an approved study: what the prototype does and does not do, how to run a session and what the exported data contain.
Contents
1. Status and purpose
VIGOR·CHROMA is a light–sound research prototype. It is not a medical device: it does not diagnose, does not treat and is no basis for prescribing or choosing optical filters. It does not replace clinical examination.
It is used only by professionals within a protocol approved by an ethics committee, with the participants’ informed consent. The prototype standardises four slow, flash-free light–sound procedures and records the session in a pseudonymised form, so that a research team can study how people respond to them.
2. The protocols
Protocol 1 — Screen colour tolerance
- A colour field across approximate hues from ≈ 400 to 700 nm; Stimulus brightness from 15 to 90 %. Auto-scan 400 → 700 moves slowly through the hues; Record the hue of discomfort stores the current hue and brightness.
- The zone ≈ 460–490 nm is marked because melanopsin-containing retinal cells are most sensitive there. The mark is for information only.
- Limitation: a screen cannot produce single wavelengths and its brightness is not calibrated; the result describes subjective discomfort on that particular screen and must not be used to recommend filters such as FL-41.
Protocol 2 — Colour self-rating before / after (CIE LAB, ΔE₀₀)
- The participant chooses a hue (h°), chroma (C*) and lightness (L*) for 1. Colour BEFORE and then for 2. Colour AFTER. Both start unset, so nothing is suggested in advance.
- The program shows L*, a*, b* for both and the colour change ΔE₀₀ (CIEDE2000, D65/2°).
- Limitation: ΔE₀₀ measures how much the chosen colour changed, not how much the person’s state changed. It is not a validated clinical scale.
Protocol 3 — VGORAY breathing pacer (≈ 6 breaths a minute)
- A warm amber field with little blue light expands on the in-breath and contracts on the out-breath. Patterns: 4 s in — 6 s out; 5 s in — 5 s out; 4 s in — 7 s hold — 8 s out. Session length 3, 5 or 10 minutes; optional quiet tone (174 / 261 Hz).
- Limitation: this is a breathing metronome. It measures no heart-rate variability or other signal and is not biofeedback.
- Use the breath-hold pattern (4–7–8) only when the protocol and the participant’s condition allow it; stop if dizziness appears.
Protocol 4 — Bilateral light–sound motion (professionals only)
- A soft point of light moves horizontally or in a figure of eight at 0.10–0.40 Hz while a quiet tone is panned between the ears. Stereo headphones are required.
- Bilateral stimulation is part of EMDR therapy. With people who have experienced trauma it may be used only by a professional trained in that method, within a therapeutic protocol.
3. Session procedure (5–15 minutes)
- Preparation. Open VIGOR·CHROMA in Chrome, Edge or Safari on a laptop or tablet. Use the same screen, brightness, room lighting and viewing distance for all participants. On first opening, read and confirm the professional-use notice.
- Registering the session. Enter a participant code without names (for example NEURO-001), choose the study group and age group as defined by your protocol and record discomfort before (NRS 0–10).
- The procedure. For Protocol 2, let the participant choose the colour BEFORE. Carry out Protocol 1, 3 or 4 as your study requires. During the procedure press Participant screen to hide numbers and menus; Esc brings the console back.
- Recording the result. Let the participant choose the colour AFTER, record discomfort after (NRS) and save the Session record (PNG) for the study file and the Session data (JSON) for statistical analysis.
4. Data and export
- Participant: pseudonymous code, study group, age group (18–29, 30–44, 45–59, 60+), NRS discomfort before and after (empty if not entered) and their difference.
- Protocol 1: approximate hue of discomfort (nm) and brightness (%). Protocol 2: L*, a*, b*, C* before and after and ΔE₀₀ — or empty values if a colour was not set.
- Protocol 3: pattern, target length, time elapsed and completed cycles. Protocol 4: trajectory, frequency and completed passes.
- Every file also records the program version, the interface language, the time (UTC) and the status “research prototype — not a medical device”.
- The data are pseudonymised, not anonymised: the code can be linked to a person through the study’s key. Keep that key separately and protect it according to the GDPR, the Law of Ukraine on Personal Data Protection and your institution’s rules. The program itself sends nothing over the network.
5. Safety and contraindications
- No flashes. All visual changes are slow: at most 0.4 Hz, far below the WCAG 2.3 threshold of three flashes a second. Even so, do not use the prototype with people who have photosensitive epilepsy.
- Do not use during an acute condition, or when the participant is unable to tell you about discomfort.
- Sound is limited in the program (relative gain ≤ 0.25) and fades in and out smoothly, but the actual loudness depends on the device: set the system volume low before the session.
- Stopping: stop at the first sign of discomfort, headache, nausea, dizziness or distress, and note it in the study file.
- Bilateral motion with trauma survivors — only by a professional trained in EMDR.
6. Open questions for the expert panel (version 2.0)
- Which validated scales should be offered alongside the session record (for example HIT-6 for migraine, RPQ for post-concussion symptoms, HADS for anxiety and depression, MFI-20 for fatigue)?
- Which additional fields does a research record need for your department — and what must stay out of it to keep it a research document rather than a medical one?
- Which session lengths and breathing patterns did participants of your study group find most comfortable?
- How should screen calibration (brightness, white point) be recorded so that results from different sites can be compared?
7. Changes in version 1.1
- Status changed to a research prototype; diagnostic claims and filter recommendations removed; the protocols renamed accordingly.
- Professional-use confirmation on first opening and a permanent notice that this is not a medical device.
- Age groups instead of exact age; a control group added; NRS scores and colours start unset instead of with preset values.
- Full interface, session record and data file in Ukrainian, English and Hungarian.
- The PNG record has a researcher’s line instead of a physician’s signature and stamp.
Scientific description
- Architecture of the VGORAY / LightSound system: DOI 10.5281/zenodo.24210613.
- Author’s ORCID: 0009-0009-7000-8722.
← Back to the VIGOR·CHROMA page
VGORAY / LightSound project
Concept and direction: Daniel A. Freedman — stage director, founder of the Lux Aeterna Light and Music Theatre
Published on LightSound — a digital ecosystem-school for interdisciplinary research
Scientific and Educational Institute of Multidisciplinary Research “SMART City”, Uzhhorod National University · svitlozvuk.freedanman.com · 2026